Libratherm.Signal Isolator/Repeater DC to DC Signal – ISM-10-1-2
₹1,000.00
- Description
- Additional information
Description
- Accepts DC signal inputs and provides optically isolated proportional analogue output.
- On site calibration facility-using ZERO/SPAN presets.
- Operates on 230VAC or 24VDC (18-36) VDC.
- Designed using ultra low drift components for long term stability.
- The interface of low-level signals coming from the sensors or transducers from the plant to DCS, SCADA, PLC or PID process controllers without ground line interferences.
- Signal multiplier – single input and 2 to 4 outputs
| Parameters | Description |
|---|---|
| Input | 1) DC input – DC current or voltage (4-20Ma)/0-5V/0-10V |
| 2) Frequency input DC levels of clock pulses of max. 10KHZ. @ (12-24)VDC | |
| Range | Absolute |
| Output | (4-20) mA, (0-5)VDC, (0-10) VDC |
| For current output, RL (max.) = 500 Ohms. | |
| For voltage output, RL (min) = 100K Ohms. | |
| No of Outputs | 1 to 4 (as specified by the model) |
| Accuracy | Absolute to the input |
| Calibration | On site calibration facility through ZERO and SPAN presets accessible to the user. |
| Isolation | Input and Output are optically isolated. Power supply is also isolated from Input and Output.(3 way isolation) |
| Isolation Voltage | Greater than 1 KV. |
| Mounting | 35-mm. DIN rail mounting ABS enclosure. |
| Supply | AC Supply : 230VAC +/-10%, 50/60Hz |
| Size | 45 x 75 x 110 |
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 200 × 200 × 100 cm |
